Seat Accessories

Race - drivers adjustable seat bracket. The bottom rails are fitted to the existing mounting holes on the Elise / Exige floorpan and the top sliding brackets are then secured to the bottom rails once you have found your ideal adjustment for control and comfort. (Weight = 1.5Kg)

Race - drivers adjustable seat bracket.
As brackets above.
(Weight = 2.6Kg)

Drivers side adapters for sliders. These are for use with the Lotus Elise / Exige standard runners and bolt straight on top as per factory seats. (The use of a sliding seat rail is not advised for motorsport use.) (Weight = 0.9Kg)

Passenger fixed rails (right-hand drive). As with the Lotus factory seats, these bolt straight on to the seat front crossmember and at the rear of the floorpan using the existing mounting holes. The brackets are angled to accomodate the narrowing passenger rail alignment. (Weight = 0.9Kg)

Passenger fixed rails (left-hand drive - European & USA). As per the UK spec passenger rails but angled for a left-hand drive fitting. (Weight = 0.9Kg)

The aluminium mounting bracket kit ensures that it is possible to run the B1, B2 & B4 seats low and enables multiple angles to suit driver preference, whilst allowing a ‘right on the floor’ seating position. They can be fixed on top of seat runners or direct to the floor.

The steel seat sliders / runners allow adjustment slide and lock on both sides for added security and are made the correct length to fit directly onto the Tillett aluminium mounting brackets.

All seats come with an Alcantara headrest as standard.
Where applicable a seat can be ordered with 3 seat pads; head, back and cushion. - see shop. These are replacement seat pads.

Toe Links