®
Below are a range of Wllans harness accessories and loading (tie down) straps.
(7/16" UNF) - For use with snap hook harness fixings
(7/16" UNF) - Longer bolt option for snap hook harness fixings
Longer bolt option for snap hook harness fixings
For eye bolt fixings
(7/16" UNF)
For use with 3" wide shoulder straps. Constructed of foam backed brush nylon material with Velcro attachment.
Length 11” (28cms)
For use with shoulder straps. Outer cover constructed from Nomex material with zip attachment and high density foam filling.
Length 11" (28cms)
Dual strap with snap hook fixing. 2" wide webbing. Adjustable for individual drivers using 3 bar locker.
Connecting to the release mechanism by inserting into the 5th (lower) slot of the release mechanism.
Dual strap with snap hook fixing. 2" wide webbing. Adjustable for individual drivers using 3 bar locker.
As with 'V' Crotch strap, the ‘T’ Crotch straps stop the driver submarining through the harness in high ‘g’ decelerations.
1" wide webbing with claw hook attachments. Rated assembly strength of 550lbf (1100lbf minimum break). Adjustable from 200cm – 30cm. Alternative attachments and extra long webbing can be supplied.
2" wide webbing with snap hook attachments. Rated assembly strength of 1100lbf (2200lbf minimum break). Adjustable from 240cm – 75cm. Alternative attachments and extra long webbing can be supplied.
This low profile floor mounted 'D' ring is ideal for securing your racecar to the trailer. The mounting sits flush on top of the floor and is secured by bolting through the 2 x 7mm holes, thus elliminating the need to cut large holes in the trailer floor.
Go forth and lap furiously.....
Copyright © HOT-LAP 2008 - Website created by OKIDOKI
You are viewing the text version of this site.
To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.
Need help? check the requirements page.